InfraRecorder
Christian Kindahl
September 1, 2012
3.96 MB
0.53.00.00
Windows 2000, XP, Vista, 7
Related apps
Description
InfraRecorder is a free, open-source program for burning CDs, DVDs and disc images. You can use it to make data discs, audio CDs and bootable discs. It also copies discs and saves them as ISO files. There is no trial period, no paid upgrade and no watermark on anything you burn.
The interface is plain. That is the reason many people still search for InfraRecorder. Modern burning suites tend to pile on video editors, media players and upsell screens. InfraRecorder skips all of that and burns the disc.
What InfraRecorder is
Christian Kindahl started the project, and it is released under the GNU General Public License. Anyone can read the source code. Anyone can use the program at home or at work without paying.
The burning itself runs on cdrtools, a long-trusted set of command-line tools. InfraRecorder puts a normal window, menus and buttons on top of that engine, so you never type a command. It runs on Windows and comes in 32-bit and 64-bit builds.
Development has slowed over the years. Burning a disc works the same way it did a decade ago, though, so the program still does its job.
Where InfraRecorder is useful
Optical discs are not dead. Plenty of cars, older computers, DVD players and office routines still depend on them. These are the jobs InfraRecorder handles well:
- Installer and rescue discs. Burn a Linux, antivirus or system repair ISO to a disc for a computer that cannot boot from USB.
- Backups. Copy photos, documents or project folders to a DVD and keep it in a drawer. A disc survives a dead hard drive.
- Audio CDs. Turn MP3 or WAV files into a CD that plays in a car stereo or an old hi-fi.
- Handing out files. Schools, small offices and photo studios still give people discs with photos, forms or software.
- Disc copies. Save a disc you own as an image, then write it to a fresh blank when the original wears out.
- Reusing rewritable discs. Wipe a CD-RW or DVD-RW and start again.
No single job here is special. The point is that one small program covers all of them.
Main features of InfraRecorder
- Data discs. Drag files and folders into a project and watch the space bar at the bottom of the window. When it looks right, you burn. Long file names survive, so your folders look the same on the disc as on your drive.
- Audio CDs. Add tracks, reorder them and burn. Common formats such as MP3 and WAV work, so you rarely need to convert anything first.
- Disc images. Burn ISO and BIN/CUE files, or build a new image from files and folders. You can also read a disc and save it as an image.
- Disc copy. Copy a disc straight from one drive to another, or go through an image file first.
- Multi-session discs. Add more files to a disc later, as long as it still has free space.
- Bootable discs. Pick a boot image in the project settings and the finished disc starts a computer on its own.
- Dual layer DVDs. Burn larger projects to dual layer media if your drive supports it.
- Erase. Wipe a rewritable disc with a quick erase or a full one.
- Drive and disc information. See what your drive can write and what is already on the disc in the tray.
- Many languages. The interface has translations, which helps if English is not your first language.
Each item is small. Together they cover about 90 percent of what a home user wants from a burner.
How to burn a data disc
The steps are short, and you will not need a manual after the first try.
- Insert a blank CD-R or DVD-R.
- Start InfraRecorder and choose a new data project.
- Drag your files and folders into the project window.
- Check the space indicator. If the bar turns red, remove something or switch to a bigger disc.
- Click the burn button, pick your drive and set a speed.
- Wait for the process to finish. The disc ejects when it is done.
A tip for important data: do not burn at the maximum speed. A slower speed gives fewer write errors, especially on cheap blanks. The extra few minutes cost you nothing.
After the burn, open the disc and check that the files open. It takes a minute. It also saves you from finding a bad disc a year later, when you actually need it.
How to make an audio CD
Choose an audio project, add your tracks and drag them into the order you want. The program shows the total length, and a standard audio CD holds roughly 80 minutes. Go over that and the burn fails.
Use a CD-R rather than a CD-RW for older players. Many car stereos and hi-fi decks read CD-R without trouble but refuse rewritable discs. Some players also dislike certain brands of blank disc, so keep a few spares for testing.
InfraRecorder does not fix volume differences between tracks. If one song is much louder than the next, fix that in an audio editor first.
Working with ISO and BIN/CUE files
An ISO file is an exact copy of a disc stored in one file. Most operating system installers and many rescue tools come this way. InfraRecorder burns these files directly, so you do not need to unpack anything.
BIN/CUE is an older pair of files that does the same job. It is common with old software and some audio discs. The program reads the CUE sheet, finds the matching BIN file and burns both as one disc.
Going the other way works too. Put files into a data project and save it as an ISO instead of burning it. That is handy when you want to send a disc layout to someone else by email or cloud storage.
Copying a disc
For a direct copy you need two drives. You put the original in one, a blank in the other, and the program reads from the first and writes to the second.
Most people have only one drive. In that case, read the original into an image file first. Then swap in a blank disc and burn the image.
Now, a fair warning. Copy-protected discs often will not copy cleanly, and InfraRecorder does not try to break that protection. Use the copy feature for discs you own, such as your own data backups, home videos and discs you made yourself.
Bootable discs
A bootable disc starts a computer without needing anything on its hard drive. That matters when the system will not start, or when you want to install a fresh operating system.
The usual route is simple. Download the ISO of the tool or system you want, then burn it as an image. It will normally be bootable already. If you build a disc yourself from files, you can point the project at a boot image in its settings. You need to supply that boot image, since the program does not create one.
Erasing a rewritable disc
Choose the erase option, pick your drive and select quick or full. A quick erase takes seconds because it only clears the disc’s table of contents. A full erase writes over the entire disc and takes far longer.
For everyday reuse, quick is enough. Pick full if the disc misbehaves or if you want the old data gone for good. Rewritable discs wear out after many cycles, so do not trust them for anything you cannot replace.
InfraRecorder compared with built-in burning tools
Windows can burn files to a disc from File Explorer, and it can write an ISO from the right-click menu. For a one-off job, that may be all you need.
The built-in tools get thin once you want more. They give you little control over audio CD layout, image creation, boot options or multi-session discs. InfraRecorder puts those options in one place. Other free burners exist, and some have more settings. Few are as light or as easy to learn.
Limits to know before you download
No program does everything. Here is what InfraRecorder does not do:
- Blu-ray is not its focus. The program is built around CDs and DVDs. If you mainly burn Blu-ray discs, check the official documentation before you rely on it.
- No video authoring. It can burn a ready-made DVD-Video folder. It does not build menus or convert video files into that format.
- No ripping tools. It can copy a disc as an image, but it is not an audio ripper.
- Slow updates. The project moves slowly. Test it on your own computer with a cheap blank disc before you trust it with something important.
Every burner has a bad day with some drive and disc combinations. If you see errors, try a different brand of blank disc or a slower speed before you blame the program.
Using it legally and safely
Burn only what you have the right to copy. Your own files, your own photos, open-source software and music you made are all fine. Copying commercial discs for other people is not.
The project’s official site, infrarecorder.org, carries documentation and the source code. Read it if you want to know how the program works or report a problem.
Installing InfraRecorder
Run the installer and choose your language. The setup lets you pick which components to install and offers file associations for image formats. Accept those if you want ISO files to open in the program with a double click.
The system may ask for permission when you first start it, because the program needs direct access to your disc drive. That is normal for any burning tool. Insert a blank disc, open the program and it should detect your drive on its own.
Frequently asked questions
Is InfraRecorder really free? Yes. It is open-source software under the GPL. There are no hidden fees, no trial limits and no registration.
Can InfraRecorder burn an ISO file? Yes. Choose the option to write an image to a disc, select the ISO file, pick your drive and start the burn.
Does it work on 64-bit computers? Yes. The program has both 32-bit and 64-bit builds.
Can I use it to make a bootable USB drive? No. It writes to optical discs only. For USB drives you need a different tool.
Why did my burn fail? The usual causes are a poor-quality blank disc, a speed set too high or a project larger than the disc. Try a new disc at a lower speed first.
What's new
- # ReleaseNotesUrl:
- # PurchaseUrl:
- # InstallationNotes:
- # Documentations:
Download links
How to install InfraRecorder?
1. Download the ZIP file.
2. Install the Split APKs Installer application
3. Open the application and click on "Install APKs".
4. Find the folder where the downloaded ZIP is located and select it.
5. Follow the steps that appear on the screen.




